[Ford-ferguson] Ford 910 Gasser

[Mike Sloane]

You would have to check the parts manuals, but I suspect that (knowing 
Ford's drive to be efficient and keep costs down) that the same fenders 
wold fit the entire line from the 600/800 through the 900 series would 
be the same. Aftermarket fenders often lack the embossed "FORD" name, 
but if you can find good used ones, they might do the job. I like to 
deal with "N Complete" <http://www.n-complete.com/>, but many parts for 
the 900 series will be available from your local New Holland tractor 
dealer or various on-line dealers, like Ankeny Tractor 
<http://www.ankenytractors.com/>, at about the same or better prices.

Normally, the chassis number is found stamped into the left side of the 
clutch housing at the top, on a flat area facing up, below where battery 
acid drips if the case cracks. The stamping is not deep, and there is 
only the model number and the serial number.

Mike

Richard Strobel wrote:
> G'day folks;
>   Usually on the AT/JD and SEL lists but now the neighbor would like to get 
> his 910 looking better and wants me to do it, so thought I'd jump over here.
> 
> Questions please:
>   Are OEM or aftermarket fenders available?
> 
>   Where would I find the data tag?
> 
> TIA
> 
> RickinMt. 

> 
> 

-- 
Mike Sloane
Allamuchy NJ
mikesloane at verizon.net
Website: <www.geocities.com/mikesloane>
Images: <www.fotki.com/mikesloane>

When people are fanatically dedicated to political or religious faiths 
or any other kind of dogmas or goals, it's always because these dogmas 
or goals are in doubt. -Robert T. Pirsig, author and philosopher (1928-)


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date: 11/5/2005