[Steam-engine] boiler feedwater injector conection

[Richard Strobel]

Jeff..I don't have to weld..thank Gawd

Rick


----- Original Message ----- 
From: "JEFF LUND" <lundmachineworks at yahoo.com>
To: "Steam-engine mailing list" <steam-engine at lists.stationary-engine.com>
Sent: Saturday, November 05, 2005 9:17 PM
Subject: Re: [Steam-engine] boiler feedwater injector conection


> Rick, is this a code boiler?  If it is you should be
> able to save the testing hassle by getting a data
> report from the National Board.  If not you will have
> to have it analyzed to weld.   It kind of sounds like
> a rabies shot delema.  Maybe even a painful.
> 
> Jeff Lund
> 
> --- Richard Strobel <Richard_Strobel7 at msn.com> wrote:
> 
> > Charlie FWIW, the inspector said no welding.  Metal
> > has to be matched, so a 
> > sample off the boiler would have to go to
> > diagnostics and then the weldolet 
> > would have to be found with the same properties.
> > 
> >   Why not Tee off the steam outlet, Eric?
> > 
> > Rick
> > 
> > 
> > 
> > ----- Original Message ----- 
> > From: <CopperheadMarine at aol.com>
> > To: <steam-engine at lists.stationary-engine.com>
> > Sent: Saturday, November 05, 2005 5:48 PM
> > Subject: Re: [Steam-engine] boiler feedwater
> > injector conection
> > 
> > 
> > > Eric
> > >
> > >   I think you can drill and tap up to half inch.
> > but that may depend  on
> > > shell thickness?
> > >
> > >  Always thought the injector steam feed should be
> > as high as you can  get 
> > > it?
> > >
> > >  I wonder if weldolets are acceptable?
> > >
> > > Charlie
> > > _______________________________________________
> > > Steam-engine mailing list
> > >
> >
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
> > > 
> > _______________________________________________
> > Steam-engine mailing list
> >
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
> > 
> 
> 
> 
> 
> __________________________________ 
> Yahoo! FareChase: Search multiple travel sites in one click.
> http://farechase.yahoo.com
> _______________________________________________
> Steam-engine mailing list
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>