[Ford-ferguson] Re: Ford-ferguson Digest, Vol 18, Issue 7

[Chris Britton]

>From: Mike Sloane <mikesloane at verizon.net>
>One caution: very early 9N tractors came equipped with an undersized (1
>1/8") pto shaft, Mike

That would be all 9n thru at least the NAA that came with that 1 1/8 pto. 
Same advice still applies.. change out the whole assembly for about 100$ or 
get the cheapy 5$ bushing.. or 8$ stub extender bushing.. Or the 50$ ORC 
made for the 1 1/8 pto .. etc.

Soundguy