[Steam-engine] boiler feedwater injector conection

Keith Kinney kkinney at herculesengines.com
Sat Nov 5 21:02:04 PST 2005


Rick
I don't recall, did you remove the flues before the inspection?
Keith


At 10:23 PM 11/5/2005, you wrote:
>Here ya go Eric:
>http://community.webshots.com/album/482243657wfbmRz
>
>Rick
>
>
>----- Original Message -----
>From: "Eric Applegate" <eric at glassactonline.com>
>To: "Steam-engine mailing list" <steam-engine at lists.stationary-engine.com>
>Sent: Saturday, November 05, 2005 8:52 PM
>Subject: Re: [Steam-engine] boiler feedwater injector conection
>
>
> > Rick, I feel silly for asking as you are so good at posting them, but
> > where can I find your boiler pics.  I'd like to have another look.
> >
> > Thanks Eric
> >
> > ---------- Original Message ----------------------------------
> > From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> > Reply-To: Steam-engine mailing list
> > <steam-engine at lists.stationary-engine.com>
> > Date:  Sat, 5 Nov 2005 20:23:10 -0700
> >
> > >Charlie FWIW, the inspector said no welding.  Metal has to be matched, so
> > >a
> > >sample off the boiler would have to go to diagnostics and then the
> > >weldolet
> > >would have to be found with the same properties.
> > >
> > >  Why not Tee off the steam outlet, Eric?
> > >
> > >Rick
> > >
> > >
> > >
> > >----- Original Message -----
> > >From: <CopperheadMarine at aol.com>
> > >To: <steam-engine at lists.stationary-engine.com>
> > >Sent: Saturday, November 05, 2005 5:48 PM
> > >Subject: Re: [Steam-engine] boiler feedwater injector conection
> > >
> > >
> > >> Eric
> > >>
> > >>   I think you can drill and tap up to half inch. but that may depend
> > >> on
> > >> shell thickness?
> > >>
> > >>  Always thought the injector steam feed should be as high as you can
> > >> get
> > >> it?
> > >>
> > >>  I wonder if weldolets are acceptable?
> > >>
> > >> Charlie
> > >> _______________________________________________
> > >> Steam-engine mailing list
> > >> http://www.stationary-engine.com/mailman/listinfo/steam-engine
> > >>
> > >_______________________________________________
> > >Steam-engine mailing list
> > >http://www.stationary-engine.com/mailman/listinfo/steam-engine
> > >
> > _______________________________________________
> > Steam-engine mailing list
> > http://www.stationary-engine.com/mailman/listinfo/steam-engine
> >
>_______________________________________________
>Steam-engine mailing list
>http://www.stationary-engine.com/mailman/listinfo/steam-engine





More information about the AT mailing list