[Farmall] PTO question

[Craig]

Once the clip is on the pin, do you just force the pin in the hole to get it
in the appropriate area?

-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com]On Behalf Of Bigdog
Sent: Saturday, May 28, 2005 10:22 PM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] PTO question


Most likely a "C" clip.  Take the pin with you to NAPA or TSC or your local
implement dealer and they can fix you up.
  ----- Original Message -----
  From: Craig
  To: Farmall/IHC mailing list
  Sent: Saturday, May 28, 2005 10:25 PM
  Subject: [Farmall] PTO question


  I have a Roto-Cutter bushhog style mower. Today while mowing, the pto
shaft
  came off of the pto/overrun clutch. When I got off to investigate, I found
  the spring-loaded pin that holds the shaft on the mower had come loose.
When
  I looked closer, I found that the pin would not stay in the closed
position
  and it eventually came all the way out. It looks like the small end of the
  pin had some sort of retainer clip in it that has broken. How do I fix
this?

  Thanks in advance.

  Craig

  _______________________________________________
  Farmall mailing list
  http://www.antique-tractor.com/mailman/listinfo/farmall
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall