[Farmall] PTO question

[Ken Mulenex@cox.net]

I had the same problem on a brush hog the cotter key on the tapered pin 
broke and I lost the whole thing I just use a bolt now. There is a cotter 
pin or lock ring on the taper pin if this comes off the taper pin will slip 
out if you were able to catch it in time then just replace the retainer and 
spring and away you go.
Ken
----- Original Message ----- 
From: "Craig" <craiger.mon at verizon.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Saturday, May 28, 2005 9:25 PM
Subject: [Farmall] PTO question


>I have a Roto-Cutter bushhog style mower. Today while mowing, the pto shaft
> came off of the pto/overrun clutch. When I got off to investigate, I found
> the spring-loaded pin that holds the shaft on the mower had come loose. 
> When
> I looked closer, I found that the pin would not stay in the closed 
> position
> and it eventually came all the way out. It looks like the small end of the
> pin had some sort of retainer clip in it that has broken. How do I fix 
> this?
>
> Thanks in advance.
>
> Craig
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>