[AT] Quiet list and tapered axles

[DAVIESW739 at aol.com]

We used a 50 ton porta power to put pressure on  the hub place it in between 
the nut and the puller. Put as much pressure as you  can and then hit the hub 
with a 12 or 20 lbs. sledge. don't be worried about  breaking things as they 
will usually come off in one piece. Hit the drum on the  outer edge straight 
down towards the center of the axle. You should hear a good  POP when it lets go.

Walt Davies
Cooper Hollow Farm
Monmouth, OR  97361
503 623-0460