[AT] Good tractor day

[charlie hill]

It attaches just like any other 3 pt implement.  The only problem is that 
the 3pt frame that is on it does not fit my tractor.  I need to move the 2 
lower pins forward about 6 inches to get the backhoe to set up straight.  As 
it is the unit is leaning back at about 25 degs or so from vertical.  Moving 
the lower pins forward will mean adding some plate to the frame to mount 
them on.  The alternative would be to modify the upper part of the frame and 
that would be a lot more complex.

It would help if I had an owners manual for it but so far I haven't found 
one.  I called the M-F dealer today and he was having a hard time finding 
any info on it.

Charlie


----- Original Message ----- 
From: "Wayne Snelling" <wsnelling at southplainscollege.edu>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Monday, March 07, 2005 7:43 PM
Subject: Re: [AT] Good tractor day


> Charlie: Did that "octupus" have to be attached not to the 3-point arms 
> but where the 3-pt arms attach to the tractor diff with different arms?
>
> Wayne
>
>
>>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>