[Farmall] 340 Utility Loader and other 340 stuff

Mark Peters mspeters at tds.net
Sun Mar 13 14:42:17 PST 2005


Hey Lane,  That loader, a #20, was made to fit the  240(maybe 230,200 , SC 
&C)because of the rear axle mounts. On a 240 there are hex shaped rear axle 
carriers and on a 340 they are square.
     It`s nice to see you`re still lurking around on here. I hope all is 
well in eastern PA. Did that storm a couple days ago nail you very 
bad?Later,  Sneaky

----- Original Message ----- 
From: "Lane Freeman" <lmfree at ptd.net>
To: "farmall list" <farmall at lists.antique-tractor.com>
Sent: Sunday, March 13, 2005 3:35 PM
Subject: [Farmall] 340 Utility Loader and other 340 stuff


> This is to try to help Paul Sigmund with his 340 Utility Loader questions 
> he
> has but also for anyone else who wants to see an International 240(and
> probably a 340 as well) loader.  I picked this one up a few years ago but
> never got a chance to get it mounted. It mounts on the rear axle and front
> frame best I can tell.  I've also included a few pictures of one of my
> International 340's with my Fast Hitch Snow Blower.  I've had the blower 
> for
> several years but finally got the gear box rebuilt this past summer.  It
> actually works very well but I miss the Cab on my Hydro 84.
> Paul, sorry this took so long, but I've been a bit under the weather over
> the last month or so.
>
> The link to the pictures is:
> http://albums.photo.epson.com/j/AlbumIndex?u=3010962&a=31678806&pw=
> Lane Freeman
> New Tripoli, PA
>
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 





More information about the AT mailing list