[AJD] 214 Baler

[Bruce Mahr]

Yes, W is wire tie, T is twine.

Bruce Mahr

----- Original Message ----- 
From: "wwwayne johnson" <wjohnson at bigriver.net>
To: "Antique John Deere mailing list" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Thursday, June 16, 2005 8:37 PM
Subject: Re: [AJD] 214 Baler


>I take the W to be wire tie.  I have a 214 and its twine.
> Merle
> ----- Original Message ----- 
> From: "Bruce Mahr" <martian at winco.net>
> To: "Antique John Deere mailing list" 
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Wednesday, June 15, 2005 9:22 PM
> Subject: Re: [AJD] 214 Baler
>
>
>> Kevin: What oiler lines? I baled many thousands of bales with a 214W and 
>> I didn't see any oiler lines on ours.
>>
>> Bruce Mahr
>>
>> ----- Original Message ----- 
>> From: "Kevin Smolkowski" <kev at smolkowski.com>
>> To: <antique-johndeere at lists.antique-tractor.com>
>> Sent: Wednesday, June 15, 2005 1:40 PM
>> Subject: Re: [AJD] 214 Baler
>>
>>
>>>
>>>
>>> I suppose I could run it with the R.  Am always worried about putting
>>> too much load on the PTO gears, but I assume the baler is faily steady
>>> and it will not see much in terms of shock load.
>>>
>>> Anything I ought to know about the 214.  It comes with a half dozen
>>> spools of wire.   Needs all those little oiler lines, other than that
>>> it is supposed to work well.
>>>
>>> Quoting greg at theoldtractorcompany.com:
>>>
>>>> Kevin
>>>>
>>>> As we are in small bale hay country, I have seen balers run with 
>>>> everything
>>>> from
>>>> an 8N Ford to a JD B. Most tractors will run a baler but it's a 
>>>> question of
>>>> how well
>>>> they run it. When I was still selling new, we always felt a JD 1050 
>>>> (33hp)
>>>> was about
>>>> the lower limit to suggest as being a baler tractor.
>>>> You might have to pick your battles somewhat. That's why an engine 
>>>> driven
>>>> baler is
>>>> still popular around here.
>>>> Greg
>>>>
>>>>
>>>> Greg Stephen
>>>> The Old Tractor Company
>>>> Stephen Equipment Company
>>>> PO Box 709
>>>> Franktown, CO 80116
>>>> 303-663-5246
>>>> 303-468-0377 FAX<<--GREAT WAY TO REACH ME!
>>>>
>>>> On Wed Jun 15  9:18 , Kevin Smolkowski <kev at smolkowski.com> sent:
>>>>
>>>> >
>>>> >
>>>> >Does my M have enough umph to run this bailer?
>>>> >_______________________________________________
>>>> >Antique-johndeere mailing list
>>>> >http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Antique-johndeere mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>>>
>>>
>>>
>>> --
>>> Kevin Smolkowski
>>> John Deere Model R
>>> visit: www.twocylinderdiesel.com
>>> _______________________________________________
>>> Antique-johndeere mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>>
>>
>>
>> _______________________________________________
>> Antique-johndeere mailing list
>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>