[AJD] 48 A Oil Filter Bowl Removal

[Rev. Gerber]

Troy:  Oil filter, canister type, bottom of the crankcase.  Never had
any trouble with the old B, or with the 720 Diesel, but this one just
won't come off.  Thanks.

Dave Gerber
Pastor
Mt. Airy U.M. Church
Cincinnati, OH 45239
Phone:  513-541-0307
FAX: 513-541-0366


-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf
Of Troy Bogdan
Sent: Sunday, January 30, 2005 10:02 AM
To: Antique John Deere mailing list
Subject: [AJD] 48 A Oil Filter Bowl Removal

Hi Dave,
Are you talking about the oil filter (not sure if a 48 A would have
that) or
the oil bath?
If it is anything like the oil bath bowl on my '53 70, sometimes you
have to
really yank on it, and work it side to side till it comes off.  Start by
pulling one side down, and then when it gets past the groove, pull down
the
other side and repeat till it comes off.  Near the end, don't yank too
hard,
or you might spill oil all over yourself.
Hope this is what you were asking about, and hope it works,  Troy


on 1/30/05 8:56 AM, Rev. Gerber at drgerber at fuse.net wrote:

> Question:  I have a 48A I just started to work on.  No matter what I
do,
> I can't get the oil filter bowl off.  Nut is loose, bowl spins, but it
> will not drop down and off.  Anybody ever had this trouble before?
> 
> Dave Gerber

_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere