[AT] I hate sandblasting!--but see this...(correction)

[Mark Greer]

The one that didn't work had "pressure" where it should have had "power".
See below

----- Original Message ----- 
From: "Robert L. Holtzer" <rholtzer at earthlink.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, January 19, 2005 4:16 PM
Subject: Re: [AT] I hate sandblasting!--but see this...(correction)


> Thanks, John.  This one worked fine.  When I took the space out of the
> previous address it still would not work.  I presume somewhere along the
> line the URL was protected and I could not change it.
>
> Bob H
>
> At 06:23 PM 1/18/2005 -0800, you wrote:
> >Bob, I just copied the URL from the site
> >as:  <http://www.projetpowerwashers.com/>.  It come right up for me.  You
> >were right, there should not be any spaces in the address.   The most
> >interesting info is on the Trivitro site.    John W.
> >
> >>
> >>At 01:53 PM 1/17/2005 -0800, you wrote:
> >>>Did a little "research" after the string on blasting with sand and
> >>>walnut shells.  I'm going to try water/media blasting using my pressure
> >>>washer.  You should take a look at the ProJet sand blaster kit from
> >>><http://www.projetpressure washers.com> (that I just ordered), but
> >>>especially some information I found on using crushed glass instead of
>