[AT] Cockshutt report

Wayne masseyharris at shaw.ca
Tue Jan 18 17:35:39 PST 2005


Ralph
The screen I mentioned is on the fitting that screws into the tank it sticks 
up about an inch into the bottom of the fuel tank it is soldered to the 
fitting,mine was all corroded and the fuel stand pipe was severely 
restricted.
Wayne

----- Original Message ----- 
From: "Ralph Goff" <alfg at sasktel.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Sunday, January 16, 2005 7:40 PM
Subject: Re: [AT] Cockshutt report


>
>
> ----- Original Message -----
> From: Wayne <masseyharris at shaw.ca>
> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
> Sent: Sunday, January 16, 2005 8:51 PM
> Subject: Re: [AT] Cockshutt report
>
>
>> Ralph:
>> If you unscrew the valve or fuel outlet from the tank there is a screen 
>> in
>> there,I had this happen before!! The sediment bowl may be part of the
> valve.
>
> Wayne, this sediment bowl has the usual screen and gasket . Its a big 
> screen
> , same diameter as the bowl. I've had it apart and cleaned it, not that
> there was much to clean. I don't recall ever seeing another screen other
> than the one that I mentioned. Of course its been a few years since I put
> that tank on the tractor so I may have forgotten.
> Ralph in Sask.
> http://lgoff.sasktelwebsite.net/
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at 




More information about the AT mailing list