[AJD] Welch plug

[Dee Schuyler]

Ken, can you just get a measurement and you are off to the closest auto 
parts store  they have all sizes,
the JD ones are usually very shallow , I like to use a little higher sided 
one's they go in easier and are in my opinion
a better deal than just the flat disc.
Dee

 ----- Original Message ----- 
From: "Ken Richards" <krichards2507 at charter.net>
To: "Antique John Deere mailing list" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Saturday, January 15, 2005 4:45 PM
Subject: [AJD] Welch plug


Since the list is slow maybe this is a good time to ask about a part.  The 
part is listed as a "welch plug" part number 30H 11R which JD parts says is 
invalid.  This plug goes in the bottom of the clutch fork bearing, part # 
A21R.  This is on a 1948 A.

I'm wondering if the plug is really needed; would it cause an oil leak?  Can 
the plug simply be made and if so does anyone have an idea of the specs? 
Thanks for any ideas.

Ken
_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere