[Farmall] Test-please delete--sorry for inconvenience

[Al Jones]

Test 123

-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of
riv5urug at adinet.com.uy
Sent: Thursday, January 20, 2005 10:50 AM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] Farmall 504 diesel engine

 Yes you must be very carefull when timing them, i saw a crankshaft
broken
in a FORD 6600 tractor because balancer shafts out of timing.

 And i have been told of a couple of British 784 with crankshaft problem
because the balancers out of timing, over here.

                                 Roberto

>-- Mensaje original --
>From: "Jim Becker" <jim.becker at verizon.net>
>To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>Subject: Re: [Farmall] Farmall 504 diesel engine
>Date: Wed, 19 Jan 2005 21:02:35 -0600
>Reply-To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
>
>
>Yes, it is a balance shaft.  It is slightly eccentric and runs
(probably)
>at 
>2x crankshaft speed.  The gears are timed.  Make sure you get it back
in
>
>time at assembly or you will be doing it over.  If you are unsure how
to
>
>time it, get the shop manual.
>
>Jim Becker
>
>----- Original Message ----- 
>From: "Mike Sloane" <mikesloane at verizon.net>
>To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>Sent: Wednesday, January 19, 2005 4:35 AM
>Subject: Re: [Farmall] Farmall 504 diesel engine
>
>
>> Yes, according to the parts manual, that is the balancer drive. It is
not
>
>> on the gasoline version of the engine. If you need an image of the
page
>
>> with the balancer assembly, contact me off-line at the address below.
>>
>> Mike
>>
>> Kevin Bish wrote:
>>> When taking the crankshaft out of a 504 diesel. What is the unit
that
>is 
>>> bolted to the bottom of the block in the center of the crankshaft
for.
>It 
>>> is driven by a gear in the center of the crankshaft, and has 2 other

>>> gears inside the housing that look like they are some kind of
counter
>
>>> balancer. I don't have a repair manual for this engine, as was just

>>> curious what this setup is for.Thanks for any information. Kevin.
>>
>>>
>>
>> -- 
>> Mike Sloane
>> Allamuchy NJ
>> mikesloane at verizon.net
>> Images: <www.fotki.com/mikesloane>
>
>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall



_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall