[AJD] Robert's Car Repair

Frank gremaux at tein.net
Thu Jan 20 13:07:55 PST 2005


Mike
don't let em scare ya.....
with the video it would be  a snap...

those hidden passages the talk about are in the open.
put the carb in your wifes oven at 450 for an hour and the screw will come 
out easily.
put in new ones form Roberts.
also buy the drills from him and use them with your fingers not in a drill
nothing to it.

Frank
gremaux at tein.net
Central Montana
http://www.angelfire.com/mt/deeregp/index.html
----- Original Message ----- 
From: "Robert M. Massengale" <ltcmikem at ktc.com>
To: "Antique John Deere mailinglist" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Wednesday, January 19, 2005 6:46 PM
Subject: Re: [AJD] Robert's Car Repair


> Frank -
>
> I wouldn't hesitate to put in one of the basic carb kits, but listening to 
> the folks on
> the List talk about pulling brass plugs, drilling out passage ways, 
> finding "hidden"
> passages, etc.... I'm not real confident about that.  I'd sure like to at 
> least hear the
> ole gal run before I trash her carb.  It's soaking in a bucket of diesel 
> right now...
>
> Mike
> Robert M. Massengale
> Fredericksburg, Texas 78624
>
>
>
>> Mike
>> do it yourself
>> get Roberts tape is you are not confident and do it
>> not that tough
>>
>> Frank
>> gremaux at tein.net
>> Central Montana
>> http://www.angelfire.com/mt/deeregp/index.html
>> ----- Original Message ----- 
>> From: "Robert M. Massengale" <ltcmikem at ktc.com>
>> To: "Antique John Deere mailinglist"
>> <antique-johndeere at lists.antique-tractor.com>
>> Sent: Wednesday, January 19, 2005 3:44 AM
>> Subject: Re: [AJD] Robert's Car Repair
>>
>>
>> > Thanks to all who responded... the post delay got me.  I posted my
>> > request Tuesday morning a little after nine am central... and got a
>> > double handful of replies in the late afternoon telling me Robert's
>> > web site was up and running fine.  This is definitely not the place
>> > to report a power outage if you're on a respirator!!
>> >
>> > Anyway, I talked to the folks at Robert's about a rebuild on my
>> > DLTX-34 and they advise the current turnaround time is 14-16
>> > weeks... and the backlog is growing, not getting smaller.  I know
>> > that Robert's get's 1st class recommendations here, but the thought
>> > of waiting three to four months to get my carb back is painful. I'd
>> > sure appreciate any recommendations on other rebuilders who do good
>> > work and might have a better turnaround time.  TIA
>> >
>> > Mike
>> > Robert M. Massengale
>> > Fredericksburg, Texas 78624
>> >
>> >
>> >>
>> >> I just tried the link and I found this: (must be some more gremlins
>> >> in the pipes :)
>> >>
>> >>
>> >> Robert's Carburetor Repair
>> >> P.O. Box 624 - 404 East 5th Street
>> >> Spencer, IA 51301
>> >> Phone: (712) 262-5311
>> >> Fax: (712) 264-0914
>> >>
>> >> David
>> >>
>> >>
>> >> Robert M. Massengale wrote:
>> >>
>> >> > Anybody up on the List that has the number for Robert's
>> >> > Carburetor Repair?  Went to their web site
>> >> > [www.robertscarbrepair.com] to get the number, but that URL just
>> >> > produces a blank web page that says "Mindspring Web Services" TIA
>> >> >
>> >> > Mike
>> >> > Robert M. Massengale
>> >> > Fredericksburg, Texas 78624
>> >> > _______________________________________________
>> >> > Antique-johndeere mailing list
>> >> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> >> >
>> >> _______________________________________________
>> >> Antique-johndeere mailing list
>> >> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > Antique-johndeere mailing list
>> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> >
>> >
>>
>>
>> _______________________________________________
>> Antique-johndeere mailing list
>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>
>>
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
> 





More information about the AT mailing list