[AT] I hate sandblasting!--but see this.....

[Robert L. Holtzer]

Yes. RLH

At 10:29 AM 1/19/2005 -0500, you wrote:
>Maybe this one?
>http://www.projetpowerwashers.com/
>
>----- Original Message -----
>From: "Robert L. Holtzer" <rholtzer at earthlink.net>
>To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
>Sent: Tuesday, January 18, 2005 4:17 PM
>Subject: Re: [AT] I hate sandblasting!--but see this.....
>
>
> > John, I can't get the first URL to work.  May be on my end but the space
> > between pressure and washers appears to create a problem.  Taking the
>space
> > out doesn't solve the address problem.  Would appreciate suggestions.
> >
> > Bob Holtzer
> >
> > At 01:53 PM 1/17/2005 -0800, you wrote:
> > >Did a little "research" after the string on blasting with sand and walnut
> > >shells.  I'm going to try water/media blasting using my pressure
> > >washer.  You should take a look at the ProJet sand blaster kit from
> > ><http://www.projetpressure washers.com> (that I just ordered), but
> > >especially some information I found on using crushed glass instead of
> > >glass beads or silica sand for outdoor or cabinet blasting at
> > ><http://www.trivitro.com/tech_msds.html>.  Read the media blasting
> > >section!   And if you want more detail the guys at both of the above
> > >businesses in Kent, WA are most helpful.  I'll probably have to wait
>until
> > >Spring to give the water blasting a trial run on an old 9N tractor with a
> > >gazillion layers of old paint.....and will let you know how it does
> > >then.     You can buy a less expensive sandblast kit from Northern Tool
> > >but the Pro Jet model has some significant advantages in my book.    John
>W.
> > >
> > >                    In the wide-open spaces of NE Oregon
> >
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at