[AJD] Final Drive Drain Plug

Terry L. Hrdlicka th01209 at alltel.net
Wed Jan 19 01:55:27 PST 2005


Robert,

Same here, but I usually weld a nut on the other end of the bolt so I 
can use a wrench or socket to get a better grip.  Then I loose the 
"special tool", and the next time I need one like it, I have to make 
another!  Gotta be a dozen or so of those around here somewhere :)

Terry



R Mull wrote:
> When I don't have or can't find a large allen wrench or square drive 
> that will fit a plug, I use the head of a bolt and a pipe wrench. Saved 
> some money not buying a  large allen wrench for a onetime job.
> 
> Thanks,
> Robert Mull
> Woodstock , Georgia
> ----- Original Message ----- From: "Robert M. Massengale" 
> <ltcmikem at ktc.com>
> To: "Antique John Deere mailinglist" 
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Monday, January 17, 2005 4:02 PM
> Subject: Re: [AJD] Final Drive Drain Plug
> 
> 
>> Thanks Ron.  That's probably going to be the best route.  Unless I
>> get another suggestion that will work today, I'll pick up an adapter at
>> NAPA when I go to town tomorrow.
>>
>> Mike
>> Robert M. Massengale
>> Fredericksburg, Texas 78624
>>
>>> I think you are about right, Mike.  I am not sure what I used in the
>>> past, but how about a 1/2 to 3/4 adapter for your socket driver?  If
>>> it is a 3/4 square, that should work.
>>>
>>> Ron Cook
>>> Salix, IA
>>>
>>> Robert M. Massengale wrote:
>>> > Almost embarrassing to ask...  I though I had the transmission &
>>> > final drive in my '41 B drained, but just discovered the large drain
>>> > plug for the final drive under the drawbar support.  Unlike the
>>> > transmission pipe drain plug, the final drive drain plug has a
>>> > recessed square slot.  I don't have any tools around the shop that
>>> > fit the drain plug hole. The square end on my 1/2 inch scoket
>>> > extension is too small.  It looks to be about a 3/4 square recessed
>>> > hole in the drain plug.  Is there a common tool Im overlooking that
>>> > fits this hole or am I going to have to fire up the forge?
>>> >
>>> > Mike
>>> > Robert M. Massengale
>>> > Fredericksburg, Texas 78624
>>> > _______________________________________________
>>> > Antique-johndeere mailing list
>>> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>> >
>>> >
>>>
>>> _______________________________________________
>>> Antique-johndeere mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>>
>>>
>>
>>
>> _______________________________________________
>> Antique-johndeere mailing list
>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 
> 




-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.0 - Release Date: 1/17/2005




More information about the AT mailing list