[AT] I hate sandblasting!--but see this.....

[Robert L. Holtzer]

John, I can't get the first URL to work.  May be on my end but the space 
between pressure and washers appears to create a problem.  Taking the space 
out doesn't solve the address problem.  Would appreciate suggestions.

Bob Holtzer

At 01:53 PM 1/17/2005 -0800, you wrote:
>Did a little "research" after the string on blasting with sand and walnut 
>shells.  I'm going to try water/media blasting using my pressure 
>washer.  You should take a look at the ProJet sand blaster kit from 
><http://www.projetpressure washers.com> (that I just ordered), but 
>especially some information I found on using crushed glass instead of 
>glass beads or silica sand for outdoor or cabinet blasting at 
><http://www.trivitro.com/tech_msds.html>.  Read the media blasting 
>section!   And if you want more detail the guys at both of the above 
>businesses in Kent, WA are most helpful.  I'll probably have to wait until 
>Spring to give the water blasting a trial run on an old 9N tractor with a 
>gazillion layers of old paint.....and will let you know how it does 
>then.     You can buy a less expensive sandblast kit from Northern Tool 
>but the Pro Jet model has some significant advantages in my book.    John W.
>
>                    In the wide-open spaces of NE Oregon
>
>
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at