[AT] Snowblowing with the 40

Ralph Goff alfg at sasktel.net
Sat Jan 8 13:20:22 PST 2005


George
 I have seen floats damaged by careless handling but I was not aware that
compressed air could also do it.
Of course a 50 year old piece of copper could be getting thin by now too so
I will handle with care.

Ralph in Sask.
http://lgoff.sasktelwebsite.net/
----- Original Message -----
From: George Willer <gwill at toast.net>
To: Antique tractor email discussion group <at at lists.antique-tractor.com>
Sent: Saturday, January 08, 2005 1:56 PM
Subject: Re: [AT] Snowblowing with the 40


> Ralph,
>
> Careful!  I'm sure you already know that air used carelessly can smash the
> float?
>
> George Willer
>
> ----- Original Message -----
> From: "Ralph Goff" <alfg at sasktel.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Saturday, January 08, 2005 1:09 PM
> Subject: Re: [AT] Snowblowing with the 40
>
>
> >
> > /
> > ----- Original Message -----
> > From: Doug Tallman <dtallman at accnorwalk.com>
> > To: Antique tractor email discussion group
<at at lists.antique-tractor.com>
> > Sent: Saturday, January 08, 2005 9:12 AM
> > Subject: Re: [AT] Snowblowing with the 40
> >
> >
> >>
> >> Ralph, some of the carbs have a tube shaped screen in the inlet. Maybe
> >> you
> >> can get by with pulling the inlet fitting and looking.
> >
> > Its been a while since I had this carb apart Doug, but I see in the
parts
> > book that there is no screen shown. I am hoping that I can just remove
the
> > fuel line at the carb inlet and just look in there or maybe a blast of
> > compressed air to clear things up. I'll try this before I open the carb
> > right up. Doing that might just mean I will need a set of gaskets for
it.
> > Not cheap , if in fact they are even available.
> >
> > Ralph in Sask.
> > http://lgoff.sasktelwebsite.net/
> >
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at





More information about the AT mailing list