[AT] OT-Brake controller

[Rob Wilson]

Brad,
 I did a ton of research when purchasing one for my Cummins 
Dodge and found that the Jordan brake controller to have 
just about the best feedback of the ones out there. What
I like about the Jordan is that there is a cable that 
connects to the brake pedal arm and gradually adjusts the
brake pressure as you apply it. There's no waiting for the
weight inside to swing and catch up with the truck and 
no delay like the ramp ones. Check out their site. 
http://www.jordanbrake.com/ and read up on them. The best
thing about it is the Jordan stands behind everything 
he makes. If you call them he will most likely answer
the phone. Installation was a breeze and adjustment was
even easier. It's weird to drive the truck with a load
on the trailer and never feel the truck jerk or pull. It
just pulls straight and you hardly know there's a trailer
back there. BTW, I bought mine off eBay and got a great
deal on it. I've driven trucks with other types but
this one is the best. That's my .02. 
Rob



-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Brad Gunnells
Sent: Thursday, February 10, 2005 11:29 AM
To: Antique tractor email discussion group
Subject: [AT] OT-Brake controller


This is a little off topic but if we haul these tractors we need to get 
stopped to unload them!!  ;-)

I recently upgraded to an 02 Ford Crew Cab 4x4 Powersmoke and need to 
install a brake controller in it. All my previous trucks had the 
Tekonsha (I think) that were hydraulic. Those tapped into the brake 
system to activate.

I've been looking at the newer controllers (http://www.etrailer.com) 
and noticed time delayed and proportional controllers. I'm leaning 
towards the Tekonsha PRODIGY T controller. This is a proportional 
controller that you don't have to set. It self levels itself to the 
vehicle.

I was curious if anyone has used the different time delayed vs 
proportional controllers and which they preferred and why. Also if 
anyone has the Prodigy controller what they think of it.

Thanks!!

Brad

---------------------------------------------------------------------
Brad Gunnells                         |                    #
University of Iowa                    |                    ||
Information Technology Services       |       I_    ___ at ___||_____
Campus Services/ITC Technical Support |   |__ I  \ |Allis Chalmers|
Iowa City IA 52242                    |   ___\___  \ \          WC|
(319)335-5524   FAX (319)335-5505     |   * * *___|__\__________   -|
mailto:brad-gunnells at uiowa.edu        |  *     *----------------\___|
                                       | *   @   *                oo
Interested in almost anything         |  *     *                o  o
besides work!  ;^)                    |   * * *                  oo

     Web Space:  http://www.southslope.net/~gunnells/
---------------------------------------------------------------------

_______________________________________________
AT mailing list http://www.antique-tractor.com/mailman/listinfo/at