[AJD] H Tranny

[Karl Olmstead]

Nope.  The weekend was spent prepping and painting my house.  At least one 
end of it.  Sun was shining; no time for tractors.  I sprayed the screw with 
penetrating oil; hopefully it's working.

-Karl



-----------------
> Did you get this worked out yet, Karl?
>
> I have the same model.  As you've discovered, after serial 10000 they 
> added a separate casting for the left bearing for this shaft.  I just 
> looked at my IT manual and it doesn't even acknowledge the earlier setup. 
> I suppose the official JD shop manual might help, I don't have one of 
> those but have found the parts manual to be very helpful to get the 
> restoration process close to right.
>
> I had mine apart in the process of restoration a couple of years ago, I 
> remember this cap screw being hard to get loose, but I'm pretty sure I 
> must have pulled the shaft out the left side of the casing when I got 
> done.
>
> Let me know if I can stare and compare anything on my machine for you.
>
> B²
> Bill Brueck (brick)
> Chatfield, MN, USA