[AJD] ok to start 830?

kreig astroguy at nas.com
Tue Feb 22 18:58:56 PST 2005


Thanks guys.  Great advice!!
I am NOT going to start the 830 untill it is reassembled.

Kreig


----- Original Message ----- 
From: "wjohnson" <wjohnson at bigriver.net>
To: "Antique John Deere mailing list" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Tuesday, February 22, 2005 6:11 PM
Subject: Re: [AJD] ok to start 830?


>
> Remember that crankshaft end play is a setting of the flywheel and clutch
> plate and has been noted the heavy clutch disk is a balance.  Don't do 
> it!!!
> Merle
> -----Original Message-----
> From: "Brandon Knapp" <lneuwirth at eriecoast.com>
> To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> Date: Tue, 22 Feb 2005 02:27:59 -0500
> Subject: Re: [AJD] ok to start 830?
>
>> Well Lou beat me to it. If you have the clutch drive disk out, do not
>> run
>> the tractor, as it is counterbalanced with the flywheel/pistons on the
>> 830.
>>
>> I GUESS you could run it as long as you had the drive disk on there,
>> but it
>> does seem a bit dangerous, and there might be something that we aren't
>> thinking of that could come loose or spray everywhere. I'd think it is
>> better to be safe than sorry. And those big parts are expensive.
>>
>> Brandon
>> ----- Original Message ----- 
>> From: "kreig" <astroguy at nas.com>
>> To: "Antique John Deere mailing list"
>> <antique-johndeere at lists.antique-tractor.com>
>> Sent: Monday, February 21, 2005 8:06 PM
>> Subject: [AJD] ok to start 830?
>>
>>
>> >I have the clutch and related parts (Pully wheel and gears) off my
>> JD830 (2
>> >cylinder version).  While i am working on this project, can I safely
>> run
>> >the tractor?  Or will there be oil flying out everywhere??
>> >
>> > Thanks,  Kreig
>>
>>
>> _______________________________________________
>> Antique-johndeere mailing list
>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 





More information about the AT mailing list