[AJD] JD nozzle tool

Dean VP deanvp at att.net
Sat Dec 24 14:19:12 PST 2005


Brandon:

No, it is not a slide hammer. It is a nozzle puller using a threaded screw
requiring the opening in the nozzle to be taped. A float tool is a gauge
used to measure and set float height.

Dean A. Van Peursem
Snohomish, WA 98290

Forbidden fruits create many jams!

www.deerelegacy.com

http://members.cox.net/classicweb/email.htm



-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf Of
Brandon Knapp
Sent: Saturday, December 24, 2005 11:06 AM
To: Antique John Deere mailing list
Subject: Re: [AJD] JD nozzle tool

The nozzle tool is basically a slide hammer right? What is a Float tool?

Brandon
----- Original Message ----- 
From: <greg at theoldtractorcompany.com>
To: "Antique John Deere mailing list" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Saturday, December 24, 2005 11:45 AM
Subject: RE: [AJD] JD nozzle tool


> Chris
> Years ago, I reproduced some of the nozzle and the float tools. (after I 
> broke our original!)
> Let me see if I have any left
> Greg
>
>
>
>
> Greg Stephen
> The Old Tractor Company
> Stephen Equipment Company
> PO Box 709
> Franktown, CO 80116
> 303-663-5246
> 303-468-0377 FAX<<--GREAT WAY TO REACH ME!
>
> On Fri Dec 23 23:08 , Chris C <jdnutinwa at yahoo.com> sent:
>
>>I would like both.  I am looking to replace my tap extractor that seems to

>>have disappeared,
> and I would love to come up with an original JD nozzle tool.
>>
>>              Chris
>>
>>Dean VP deanvp at att.net> wrote:
>>  Chris:
>>
>>Ok, now you legitimately have me confused. Are you looking for a Tap
>>Extractor or a Nozzle Extractor?
>>
>>Dean A. Van Peursem
>>Snohomish, WA 98290
>>
>>Forbidden fruits create many jams!
>>
>>www.deerelegacy.com
>>
>>http://members.cox.net/classicweb/email.htm
>>
>>
>>
>>-----Original Message-----
>>From: antique-johndeere-bounces at lists.antique-tractor.com
>>[antique-johndeere-bounces at lists.antique-tractor.com','','','')">antique-j
ohndeere-
> bounces at lists.antique-tractor.com] On Behalf Of
>>Chris C
>>Sent: Thursday, December 22, 2005 9:09 PM
>>To: Antique John Deere mailing list
>>Subject: RE: [AJD] Tap Extractor
>>
>>
>>Dean,
>>
>>The tap is broken, and the nozzle is junk, don't
>>need either, just want to have a tap extractor again.
>>They are usually only good for a use or two. I went
>>after this one with a reverse 1/4" drill bit, I got
>>the nozzle to spin the the casting and then it was
>>mine.
>>
>>I will order a new nozzle from Burrey Carb
>>Service. I have 4 other carbs to go through, and as
>>a mechanic they thread thing works, but as a
>>collector I want the correct tool. Wven if I just
>>paint it green and put it on a shelf.. (sorry, I have
>>been reading Greg's book on Two Cylinder Collectibles,
>>I had to paraphrase there)
>>
>>I use the #10 on B carbs and the likes, but
>>1/4-20 works better on the A carbs.
>>
>>Chris
>>--- Dean VP wrote:
>>
>>> Chris:
>>>
>>> I'm easy to confuse so bear with me. You got the tap
>>> out of the nozzle but
>>> the nozzle is now destroyed. Shouldn't you be
>>> looking first for a
>>> replacement nozzle rather than an extractor? Or are
>>> you now going to try to
>>> get the replacement nozzle out of the other
>>> carburetor and need a nozzle
>>> extractor to retrieve it?
>>>
>>> If I'm not totally FUBAR, all you need to do is take
>>> an appropriate length
>>> and thickness of bar stock, drill a clearance hole
>>> in it for a #10 screw,
>>> tap the nozzle with #10 threads and an appropriate
>>> length #10 screw will get
>>> the nozzle out.
>>>
>>> What am I missing?
>>>
>>>
>>> Dean A. Van Peursem
>>> Snohomish, WA 98290
>>>
>>> Forbidden fruits create many jams!
>>>
>>> www.deerelegacy.com
>>>
>>> http://members.cox.net/classicweb/email.htm
>>>
>>>
>>>
>>> -----Original Message-----
>>> From:
>>> antique-johndeere-bounces at lists.antique-tractor.com
>>>
>>[antique-johndeere-bounces at lists.antique-tractor.com','','','')">antique-j
ohndeere-
> bounces at lists.antique-tractor.com]
>>> On Behalf Of
>>> Chris C
>>> Sent: Thursday, December 22, 2005 6:51 PM
>>> To: ATIS LIST
>>> Subject: [AJD] Tap Extractor
>>>
>>>
>>>
>>> I was on a roll last night. I bought a DLTX-19
>>> for my AR on Ebay, the guy didn't describe it very
>>> well, said it was a DLTX-10 but clearly wasn't, so
>>> I
>>> bought it for what I thought was a grat price.
>>>
>>> I was tapping the brass nozzle to pull it out
>>> when the phone rang.. Set the carb on the bech..
>>> get
>>> phone.. carb falls to floor, breaks tap on inside
>>> nozzle..
>>>
>>> I used to own a tap extractor, but alas it
>>> could
>>> not be found. Three parts stores and one hardware
>>> store later, everyone knew what i wanted, nobody
>>> had
>>> it.. I did manage to get the nozzle out, it is
>>> destroyed now however. The rest of the carb is
>>> great,
>>> all the passage ways are clear.. Much better than
>>> the carb that came with the tractor.. It looked like
>>> a
>>> ball of mud, inside and out.
>>>
>>> Anyone have an extra nozzle tool that Deere
>>> used
>>> to sell for removing these nozzles?
>>>
>>> Chris
>>>
>>>
>>>
>>> __________________________________________
>>> Yahoo! DSL - Something to write home about.
>>> Just $16.99/mo. or less.
>>> dsl.yahoo.com
>>>
>>> _______________________________________________
>>> Antique-johndeere mailing list
>>>
>>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>>
>>>
>>>
>>> _______________________________________________
>>> Antique-johndeere mailing list
>>>
>>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>>
>>
>>
>>
>>
>>__________________________________________
>>Yahoo! DSL - Something to write home about.
>>Just $16.99/mo. or less.
>>dsl.yahoo.com
>>
>>_______________________________________________
>>Antique-johndeere mailing list
>>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>
>>
>>_______________________________________________
>>Antique-johndeere mailing list
>>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>>
>>
>>
>>
>>---------------------------------
>>Yahoo! Photos
>> Ring in the New Year with Photo Calendars. Add photos, events, holidays, 
>> whatever.
>>_______________________________________________
>>Antique-johndeere mailing list
>>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
> 


_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere






More information about the AT mailing list