[Farmall] setting clearance valves on 706 D

Roberto Rivero rj.rivero at gmail.com
Thu Dec 22 16:09:14 PST 2005


So if i understad well with Piston 1 in TDC i set first cild.valves, then
turn the engine until  cilinder 5 valves are closed with piston 5 in TDC and
then set cilinder 5 valves,  and so on, then 3 etc.

Good any way when i be with the tractor hope the firing orther is in the
block and i will have my manual, but,...i will be very far of a place with
internet.  Thanks anyway.Mike


On 12/22/05, Mike Sloane <mikesloane at verizon.net> wrote:
>
> I don't my manual here in the house, Roberto, so I can't help you with
> the valve clearances. But the firing order *should* be 1,5,3,6,2,4. That
> is typical for six cylinder engines.
>
> Mike
>
> Roberto Rivero wrote:
> > Next week end i will be in the farm and would like to set the clearrance
> of
> > valves to the 706 Diesel (the engine is not the german one  but the
> > american  one) with one engine of four cilinders with firing order 1342
> i
> > have not problem but this one with six cilinders i donot know the firing
> > order, so after having the cil Nº1 on TDC i donot know how to go on, and
> i
> > donot know the measure of the clearance too.  i have the manual of the
> > engine but is in the farm now so i will see that when i arrive there.
> >  Thanks in advance for your help ( the inj. pump is a Roosa master for
> if
> > that help).
> >
> >          good tractoring and thanks  again
> > --
> > Ing. Civil Roberto Rivero
> > Montevideo Uruguay South Am.
> > 00598 99620035
> > _______________________________________________
> > Farmall mailing list
> > http://www.antique-tractor.com/mailman/listinfo/farmall
> >
> >
>
> --
> Mike Sloane
> Allamuchy NJ
> mikesloane at verizon.net
> Website: <www.geocities.com/mikesloane>
> Images: <www.fotki.com/mikesloane>
>
> The test of our progress is not whether we add more to the abundance of
> those who have much, it is whether we provide enough for those who have
> too little. -Franklin D. Roosevelt, 32nd US President (1882-1945)
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.371 / Virus Database: 267.14.3/209 - Release Date: 12/21/2005
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>



--
Ing. Civil Roberto Rivero
Montevideo Uruguay South Am.
00598 99620035



More information about the AT mailing list