[Farmall] Lost Steering on my A yesterday

[Jim Becker]

I'm glad it helped.  I would probably try to find a replacement housing but 
I suppose it depends on how bad the damage is.  Parts 15 and 23 are held 
together with 6 bolts but also have 2 dowels for alignment.  Part 22 (the 
gasket) has 8 holes for the bolts (6) and the dowels (2).  Reference # 30 is 
one of the dowels.

Jim Becker        jim.becker at verizon.net

----- Original Message ----- 
From: "Troy Bogdan" <tbogdan1 at earthlink.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Saturday, August 27, 2005 6:53 PM
Subject: Re: [Farmall] Lost Steering on my A yesterday


> Hi Jim,
> Thanks so much for the diagram, that was extremely helpful.  The part that
> broke was #15, it got a crack in it.  Plus I am missing a few of those 6
> bolts that holds it together, and it looks like on part 22 there are two
> other bolt holes besides the six, and that is the one that fell out that 
> was
> just sitting there.  Now I gotta figure out what to do next, either repair
> part #15, or maybe try and find another one.  Thanks again,  Troy
>
> on 8/26/05 4:30 PM, Jim Becker at jim.becker at verizon.net wrote:
>
>> Troy,
>> Take a look here:
>> http://www.cleancomputes.com/Cub/A%20-%20B/TC-26E%20Parts%20Catalog/Page%2096.
>> jpg
>> Reference # 26 clamps to # 20 with the 7/16 bolt I mentioned earlier.
>> Reference # 23 is held to #15 with 6 bolts like the other one I 
>> mentioned,
>> 1/2 x 1 1/4 NC.  Maybe one of these 6 bolts is the one you said came out.
>> Even if several of these bolts are missing, I believe the parts are 
>> doweled
>> so #23 shouldn't have moved much.  It wouild not explain loosing 
>> steering.
>>
>> By the way, # 15 is called Steering Gear Housing, # 23 is called Steering
>> Gear Housing Base.
>>
>> Jim Becker        jim.becker at verizon.net
>>
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall