[AJD] wheel removal, impossible?? THANKS

[astroguy at nas.com]

Great ideas Bruce, THANK YOU!!!

Why didn't you tell me this BEFORE I removed the rim from the wheel and
spent $100 on the propane set up???    haha

I will try the pipe idea, sounds great.

Kreig




Original Message:
-----------------
From: Bruce Mahr martian at winco.net
Date: Fri, 26 Aug 2005 20:15:18 -0500
To: antique-johndeere at lists.antique-tractor.com
Subject: Re: [AJD] wheel removal, impossible??


Kreig: I have the best luck with loosening the inside three bolts on the 
inner wedge a couple of turns and then driving the tractor around and 
individually hitting each brake pedal separately to help jar them loose.
You 
can also take a heavy wall pipe that will fit over the axle and weld a
heavy 
plate over the opening on the outer end and cutting a half moon piece off 
the inner end so that when you hit the outer end, the protruding lip on the 
inner end will hit only on the wedge you have the jack screws tightened up 
against.

Bruce Mahr

----- Original Message ----- 
From: "astroguynascom" <astroguy at nas.com>
To: <antique-johndeere at lists.antique-tractor.com>
Sent: Friday, August 26, 2005 7:11 PM
Subject: [AJD] wheel removal, impossible??


>
> Trying to remove the wheel hubs off the JD 50.
>
> Have removed all of the bolts. Cleaned up the two bolts used for pushing
> out the wedge.  Reinstalled and tightened these two bolts, and I do mean
> tightened!!   Using a brass punch and hammer and beating on the two wedges
> with no results.
>
> Installed a home made wheel puller made up of 2" square thick wall tubing
> and a 1.25 inch bolt used to press on the axle.
>
> Now all of this put together with no movement.
>
> Went out and bought a Propane tank, propane, and a rose bud (sp?) torch 
> and
> heated up the rim for 20 minutes. Tightened the wheel puller (max),
> tightened the push bolts (max), beat on the wedges with brass driver and
> heavy hammer, AND beat on the back side of the wheel with a brass hammer.
> All at about the same time.
>
> Results . . . . . . . . .  no movement, nothing.
>
> What to do next??    Cry???
>
> Kreig
>
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
>
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 


_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere


--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .