[AJD] wheel removal, impossible??

[Lonnie Coon]

Try hitting the end of the axle with a BFH while you have pressure on the 
wedge with the pusher bolts.
Lonnie
----- Original Message ----- 
From: <astroguy at nas.com>
To: <antique-johndeere at lists.antique-tractor.com>
Sent: Friday, August 26, 2005 6:11 PM
Subject: [AJD] wheel removal, impossible??


>
> Trying to remove the wheel hubs off the JD 50.
>
> Have removed all of the bolts. Cleaned up the two bolts used for pushing
> out the wedge.  Reinstalled and tightened these two bolts, and I do mean
> tightened!!   Using a brass punch and hammer and beating on the two wedges
> with no results.
>
> Installed a home made wheel puller made up of 2" square thick wall tubing
> and a 1.25 inch bolt used to press on the axle.
>
> Now all of this put together with no movement.
>
> Went out and bought a Propane tank, propane, and a rose bud (sp?) torch 
> and
> heated up the rim for 20 minutes. Tightened the wheel puller (max),
> tightened the push bolts (max), beat on the wedges with brass driver and
> heavy hammer, AND beat on the back side of the wheel with a brass hammer.
> All at about the same time.
>
> Results . . . . . . . . .  no movement, nothing.
>
> What to do next??    Cry???
>
> Kreig
>
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
>
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
>