[AT] No spark

[Jeff Green]

Yes, the points open & close
*****************************
Jeff G
*****************************

----- Original Message ----- 
From: "Phil Auten" <pga2 at hot1.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Sunday, August 14, 2005 10:18 PM
Subject: Re: [AT] No spark


> Are the points actually being opened by the cam in the distributor? 
> The rubbing block
> may be worn down too far.
> 
> Phil
> 
> At 08:13 AM 8/14/05, you wrote:
>>I'm having a fit solving a real basic problem on my Ford 601.  Can't 
>>get a spark.  Not at the plugs or the points.  I know I'm getting 
>>power to the distributor, from getting zapped when I stuck a 
>>screwdriver in the points.  I've replaced the coil & 
>>condensor.  It's a 12 volt system.
>>
>>Any ideas on where to look next?
>>
>>Jeff G.
> 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at