[AT] DEAR CURTIS KELLUM

[Gerald Johnson]

Rather than replying to every message thread by stating your desire to be
removed from this list (which will get you nowhere), you might want to click
on the link list very near each of your replies that says
http://www.antique-tractor.com/mailman/listinfo/at

By clicking this link you will be taken to a page where you will find the
words "unsubscribe information".   Follow the instructions and you will be
removed.  Now, isn't that a lot easier than the way you are trying to do it?
Amazing what can be accomplished by reading the instructions isn't it!  8-)
Have a nice day.

Gerald
----- Original Message ----- 
From: "Curtis Kellum" <tinman at keyisp.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, August 03, 2005 7:53 AM
Subject: Re: [AT] Air hose stupid attack...


>
>
> Dean VP wrote:
>
> > Farmer:
> >
> > Welcome to the club. Been there done that!  Too many times. The end
result
> > is what is important.
> >
> > Dean A. Van Peursem
> > Snohomish, WA 98290
> >
> > I'm a walking storeroom of facts..... I've just lost the key to the
> > storeroom door
> >
> > www.deerelegacy.com
> >
> > http://members.cox.net/classicweb/email.htm
> >
> > -----Original Message-----
> > From: at-bounces at lists.antique-tractor.com
> > [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Indiana
Robinson
> > Sent: Tuesday, August 02, 2005 6:21 PM
> > To: at at lists.antique-tractor.com
> > Subject: [AT] Air hose stupid attack...
> >
> >         I had to put a new matched set of 3 Vee belts on son Scott's New
> > Idea "Cut/conditioner"
> > (large flail cutter / windrower) today. A previous owner had put the
wrong
> > sized belts on
> > it. The pully Vee's are 5/8" wide but they had put 1/2" wide belts on it
and
> > they were
> > running in the bottom of the grooves instead of gripping the sides. It
had
> > been slipping
> > at times even though they were quite tight under spring tension.
Yesterday
> > one let go and
> > another was about to go so I sent Diana off to find me 3 new ones.
Several
> > places could
> > order them but it was going to take too long. Local NAPA to the rescue.
They
> > could have
> > them by 7:00 AM this morning and only $42.55 for all three. As I started
> > getting stuff
> > together to change them I got my little butterfly impact wrench out so I
> > could use it on
> > the mile long tension spring bolt. I was not parked real close to the
shop
> > (the MTA and
> > the baler were sitting where I usually work) so I pulled almost all of
the
> > air hose off
> > of the hanger and tossed it out the door. I then started looking for the
> > snap coupler end
> > and didn't see it in the pile of hose. I started kicking the pile of
hose
> > around looking
> > for the end but it was nowhere on the ground. After mumbling some things
> > that shouldn't
> > be said in mixed company I finally found it securely attached to the air
> > tool in my
> > hand... DUH!!!  I wonder if they still have another empty room out at
the
> > home...   :-)
> >         Sure made a big difference in the way the unit handled the tough
> > spots of extra tall
> > hay.
> >
> > --
> > "farmer", Esquire
> > At Hewick Midwest
> >       Wealth beyond belief, just no money...
> >
> > Paternal Robinson's here by way of Norway (Clan Gunn), Scottish
Highlands,
> > Cleasby Yorkshire England, Virginia, Kentucky then Indiana. In America
100
> > years
> > before the revolution.
> >
> > Francis Robinson
> > Central Indiana USA
> > robinson at svs.net
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
>
> Hi, this site is not what I was expecting, please remove my name. Thanks,
Curtis
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>