[AT] 9N Ford running boards

[Indiana Robinson]

On 26 Apr 2005 at 13:34, George Willer wrote:

> Both my 9Ns have home made running boards that were on them when I bought 
> them.  Since the 9/2Ns didn't have running boards originally finding a set 
> will be difficult.  It is my understanding that running boards from an 8N 
> will bolt right up.  Can anyone confirm that it's true?  If so, it will make 
> the search much easier.
> 
> George Willer


	They should but you would have to have the support bracket that bolts under the radius 
rod socket too. Most after market running boards hung off of the foot pegs. The factory 
set off of a TO-20 / TO-30 might fit better. They hung off of the pegs. When we bought 
the new Jubilee and I was switching back and forth between the Jubilee and the Ferguson 
(and an 8N and the Ferguson) I missed not having the peg support on the Fords. It was a 
lot easier to brace yourself on rough ground using the peg area. The Ferguson had very 
good sturdy running boards.


-- 
"farmer", Esquire
At Hewick Midwest
      Wealth beyond belief, just no money...

Paternal Robinson's here by way of Norway (Clan Gunn), Scottish Highlands,
Cleasby Yorkshire England, Virginia, Kentucky then Indiana. In America 100 
years 
before the revolution.


Francis Robinson
Central Indiana USA
robinson at svs.net