[AT] OT; Gasoline prices + on topic socket question

[H. L. Staples]

With your 1/8" material you would only need two attached so that they were
on intersecting sides.

Should work well with hot glue, just enough to hold in place while the
socket is placed on the plug. 

Good luck 
 
-------Original Message-------
 
From: Grant Brians
Date: 04/13/05 09:49:23
To: Antique tractor email discussion group
Subject: Re: [AT] OT; Gasoline prices + on topic socket question
 
HL, that is a thought I had not considered. Hmm, now do I have 1/16"
material - steel of course. I might have some 1/8 which would be easier for
me. The glue type is an interesting question too.
        Grant Brians
----- Original Message -----
From: "H. L. Staples" <hlstaples at mcloudteleco.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, April 13, 2005 5:42 AM
Subject: Re: [AT] OT; Gasoline prices + on topic socket question
 
 
> Grant
>
> Would it be possible to cut some shims of 1/16" material and glue it to
> the
> four sides of the part to be removed and use your 1" socket.
>
> Just a thought 8<)
>
> H. L. Staples
> McLoud, Oklahoma
> USA
> -------Original Message-------
>
> From: Grant Brians
> Date: 04/13/05 01:40:07
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
 
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at