[AJD] metal coating

Michael Ostrander antiquejd at fwi.com
Fri Apr 1 19:40:57 PST 2005


Steve-
Thanks.  Gun Bluing was one of the products I was considering but never
having had any experience with it, I did not know where to turn.  I read the
paragraph with it indicating oil on top of the bluing but I think that would
attract dirt/dust and defeat the purpose.
Michael

-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com]On Behalf Of
Steve W.
Sent: Friday, April 01, 2005 9:20 PM
To: Antique John Deere mailing list
Subject: Re: [AJD] metal coating


Too thick for what your doing. For shafting your probably limited to
bluing or hard chrome. If the shafts have to slide at all any paint will
cause binding. I would probably use bluing/blackening solution like
Oxpho-Blue. easy to apply and could be touched up easily when required.
http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=1072&title=OXPHO
-BLUE

Steve Williams

----- Original Message -----
From: "Michael Ostrander" <antiquejd at fwi.com>
To: "Antique John Deere mailing list"
<antique-johndeere at lists.antique-tractor.com>
Sent: Friday, April 01, 2005 8:14 PM
Subject: RE: [AJD] metal coating


> Eric-
> Any idea what the thickness might measure out to?  This will be
coating a
> splined shaft within a splined shaft.  Price is not the primary
concern.
> Michael
>
> -----Original Message-----
> From: antique-johndeere-bounces at lists.antique-tractor.com
> [mailto:antique-johndeere-bounces at lists.antique-tractor.com]On Behalf
Of
> Eric LaCruze
> Sent: Friday, April 01, 2005 7:06 PM
> To: Antique John Deere mailing list
> Subject: Re: [AJD] metal coating
>
>
> I had my exhaust manifold powder coated black, with high-temp header
> coating. It's not on the tractor yet, but it stays on race car headers
> very well, doesn't rust, and has a nearly undetectable thickness.
> I used a local place, but Jet-Hot has a worldwide reputation and I've
> never heard anything put praise for them. Warning, not cheap.
>
> http://www.jet-hot.com/
>
> Eric
>
> Michael Ostrander wrote:
>
> > I am looking for suggestions for a material to cover cast iron that
has
> the
> > following properties:
> >
> > - thin- minimum thickness
> > - rust resistance- thin covering but will not rust
> > - low maintenance- do not want to have to recoat every 6 months
> > - coloring- either clear or black, or dark
> > - adherence- will not adhere to the mating surface but will let both
> pieces
> > move as needed
> >
> > I thought about the material used on gun barrels but do not know
anything
> > about the material.  Paint is always an option but thickness of
primer and
> > top coat on sliding parts could be an issue.  Oil will collect dirt
and
> that
> > is unacceptable.
> >
> > Any suggestions would be welcomed.
> >
> > Thanks,
> >
> > Michael
> >
> > p.s.- before i get jumped, this is for an antique john deere tractor
that
> > has wiggle room around normal color standards.
> >
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>

_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere




More information about the AT mailing list