[Steam-engine] Wachs Engine
Andy glines
pioneersop96 at yahoo.com
Fri Sep 24 06:51:01 PDT 2004
Can you post the link to the picture you folks are
discussing? Do you have any problems with the pine
leaving excess soot/creosote in the flues or stack. I
remember that we never burned pine in our wood stack
for fear if a chimney fire from buildup.
--- CopperheadMarine at aol.com wrote:
> Rick
>
>
> Lets just say the engine is a full governed rpm
> for now. I will let you in
> on why it looks like it is turning so fast a little
> later on if you get to
> photographing your engine set up.
>
> The picture of the fire is one of many I have
> taken and is what I call a
> good fire mass, there are different ways to photo
> fires to get different
> effects. Digital cameras are great. You can take a
> lot of PICS and keep only the
> good ones. You will get some really good ones just
> from the law of averages.
>
>
> My choice of wood is split pine, fairly small
> pieces stacked in all
> directions keeping the firebox as full as possible.
> I regulate the fire some with
> draft and some with size of wood. Small wood more
> heat faster, larger pieces
> less heat slower. My favorite choice for a lot of
> steam is the diseased part
> of a pine it is full of rosin and burns like coal.
> That is the picture of the
> black smoke rolling out of the stack. The stack is
> 18 feet high and creates
> enough draft that you don't need to clean out ashes,
> they end up on the roof!
> If you are planning on setting up your boiler in a
> building I will give you
> some pointers on install.
>
> You can use oil but not the way you might think.
> You need to get up steam
> with something else like wood or propane and use a
> jet of steam hitting the
> oil dribble to atomize it and it needs to be blowing
> on fire brick. But that
> is putting the horse way before the cart.
> Do a little reading to get fundamental
> understanding, find a show and go see
> it in action, Ask lots of questions and listen to
> what is said. Hit a steam
> school if at all possible.
> Clean up that engine, look it over, oil it up get
> an idea of what goes on
> as it turns, valving and such. The engine is safe to
> play with. The boiler
> may not be. You really need someone to help out with
> getting the boiler ready
> that is competent. Look that boiler over good, take
> out the hand holes clean
> it out, look for stamped numbers and letters. Tell
> us what you find.
>
> The only stupid questions are the ones you don't
> ask?
>
> Chas F
> _______________________________________________
> Steam-engine mailing list
>
http://www.stationary-engine.com/mailman/listinfo/steam-engine
>
=====
Andy Glines
Evansville, IN
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com
More information about the AT
mailing list