[AJD] Stuck Wheel on 620

[Jim Showers]

Nope!  No damage to my 530.  I did that about 8 years ago and the tractor is
used every week.  I move rolls of hay with the loader.
Jim

----- Original Message ----- 
From: "John Paur" <johnjanpaur at directcon.net>
To: "Antique John Deere mailing list"
<antique-johndeere at lists.antique-tractor.com>
Sent: Sunday, September 19, 2004 11:52 PM
Subject: Re: [AJD] Stuck Wheel on 620


> Question - Would you be concerned about damaging the bearings by whacking
> the end of the axle with a sledge hammer?  John
>
> ----- Original Message -----
> From: "Jim Showers" <steamcar at hereintown.net>
> To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Sunday, September 19, 2004 4:01 PM
> Subject: Re: [AJD] Stuck Wheel on 620
>
>
> > Did you hit the very end of the axle with a sledge hammer?  After doing
> the
> > things you had and driving my 530 with the bolts loose for 6 months,
> Someone
> > had this problem and wrote an article in either Green Magazine or the 2
> > Cylinder magazine.  The response was to use a sledge on the end of the
> axle.
> > One hit on the 530 axle and the wheel was free.
> > Jim Showers
> >
> >
> > ----- Original Message -----
> > From: "Robert Galloway" <robert66 at tcinternet.net>
> > To: <Antique-johndeere at lists.antique-tractor.com>
> > Sent: Sunday, September 19, 2004 12:13 PM
> > Subject: [AJD] Stuck Wheel on 620
> >
> >
> > > Guys,
> > >       I'm trying to get my 620 wide front row crop through a garage
door
> > > that it doesn't want to go through.  It will go if I can get the
wheels
> > > in.  I moved one.  The other is solid as a rock.  I've. loosened the
> > > bolts inside and out.  I've applied liquid wrench and WD40.  I've
> > > tightened the two jack bolts with a cheater on the lever arm.  Anybody
> > > have any tricks they'd care to share?
> > >
> > > Oh, and yes, I've smacked the heck out of things with a mallet.  Need
to
> > > get the file out and smoothe over the damage.  (Damn)
> > >
> > > Bob G.
> > > Plymouth, MN
> > >
> > > p.s. I'm about ready to call the nearest JD dealer and see if they
make
> > > house calls.
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Antique-johndeere mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> > >
> > >
> >
> >
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
> >
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>