[AJD] JD 40 Carb

Tue Sep 7 20:15:11 PDT 2004

Does the seat screw in without any extra force?  My original seat screws in without issue but when I use these I get an 1/8 of an inch away from getting it in and it binds big time.  I gave up on the 40S and reused the old one.  If I hadn't of lost the needle on the 40W I would have put it back also.

LeRoy

> 
> From: "Michael Ostrander" <antiquejd at fwi.com>
> Date: 2004/09/07 Tue PM 10:20:37 EDT
> To: "Antique John Deere mailing list" <antique-johndeere at lists.antique-tractor.com>
> Subject: RE: Re: [AJD] JD 40 Carb
> 
> LeRoy-
> I have successfully used that kit in several different MT's over the years
> without any problems.
> 
> -----Original Message-----
> From: antique-johndeere-bounces at lists.antique-tractor.com
> [mailto:antique-johndeere-bounces at lists.antique-tractor.com]On Behalf Of
> LeRoy Price
> Sent: Tuesday, September 07, 2004 8:35 PM
> To: Antique John Deere mailing list
> Subject: Re: Re: [AJD] JD 40 Carb
> 
> 
> 
> OK, Here ya go.  Its a kit made by Tisco PN#859966.  Says its for models M,
> MC,MT,40 and 320.  Can't seem to find my JD 40 parts book but it mentions
> its for Carb TSX 245, 475 and 530.
> 
> LeRoy
> 
> >
> > From: greg at theoldtractorcompany.com
> > Date: 2004/09/07 Tue PM 12:54:33 EDT
> > To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> > Subject: Re: Re: [AJD] JD 40 Carb
> >
> > Leroy
> > Wait a sec. Can you tell me what the part # was of the kits you just
> bought? That might settle some questions. Also the price range so I know
> what brand of kit they are.
> > Greg
> >
> > Greg Stephen
> > The Old Tractor Company
> > Stephen Equipment Company
> > Box 709
> > 7460 E Hiway 86
> > Franktown, CO 80116
> > 303-663-5246
> > 303-688-4170 fax
> >
> >
> > ------------------------------------------------
> > On Tue, 7 Sep 2004 7:40:40 -0400, LeRoy Price <lep at epix.net> wrote:
> >
> > > Duane,
> > >
> > > Both kits had the needle with the tip you mention but there was a slight
> difference in the seat length when I compared the old with the new.  The old
> ones screw in very nice, no fighting.  I also noticed that the float looked
> a bit shorter from the original but not much.
> > >
> > > Maybe I should order another from Greg rather then Wenger's here in PA.
> > >
> > > LeRoy
> > >
> > >
> > > >
> > > > From: "Duane Larson" <jdlarson at comcast.net>
> > > > Date: 2004/09/07 Tue AM 12:30:12 EDT
> > > > To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> > > > Subject: Re: [AJD] JD 40 Carb
> > > >
> > > > LeRoy,
> > > > That sounds strange - I've built a bunch of TSX carburetors and rarely
> have
> > > > a problem screwing the seat in place.  I wonder if you were given a
> wrong
> > > > kit, or it contains the wrong needle and seat.  Does the needle have a
> viton
> > > > (rubber) tip?  I don't recall a problem with needle size, but it is
> late and
> > > > I can look at my notes later today.
> > > >
> > > > Another distinct possibility is the float is hanging on the cast
> body - that
> > > > is hard to see, make sure the float arms are symmetric as if they are
> bent
> > > > much they will drag and not cause the needle to seat.  Bruce was
> right - you
> > > > should be able to hear the float move up and down as you turn the
> carb.
> > > > Duane Larson
> > > >
> > > > ----- Original Message -----
> > > > From: "LeRoy Price" <lep at epix.net>
> > > > To: "Antique John Deere mailing list"
> > > > <antique-johndeere at lists.antique-tractor.com>
> > > > Sent: Monday, September 06, 2004 10:28 PM
> > > > Subject: Re: [AJD] JD 40 Carb
> > > >
> > > >
> > > > >
> > > > > Yup, I had problems putting that seat in and I believe you are
> talking
> > > > about that little O ring that seat under it.  You know I bought 2 carb
> sets
> > > > for each JD 40 I have.  The seats seems to be slightly taller.  I had
> to go
> > > > out and buy a screw driver that was wider but still was a tad short at
> the
> > > > blade.  I got it in both carbs almost 3 quarters in before I really
> had to
> > > > apply pressure.  I had to give up on the JD 40S it just wouldn't go in
> but I
> > > > was able to get it in the 40W.  I did eventually hook up the gas
> without the
> > > > body to see if it shut off.  Thats when I saw it leak around the seat,
> a
> > > > little more pressure to tighten it seem to work.  But once I get it
> together
> > > > it floods.  Not sure how far I can bend the floats down before I don't
> have
> > > > enough gas in the bowl.  The kits said JD40 but maybe there marked
> wrong.  I
> > > > lostthe original needle or I would have put that one back.  One thing
> I
> > > > noticed is that the new needle doesn't fit in the old seat its bigger.
> Is
> > > > that right?
> > > > >
> > > > > LeRoy
> > > > >
> > > > > Incompetence: When you earnestly believe you can compensate for lack
> of
> > > > skill by doubling your efforts, there's no end to what you can't do.
> > > > >
> > > > > _______________________________________________
> > > > > Antique-johndeere mailing list
> > > > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> > > >
> > > > _______________________________________________
> > > > Antique-johndeere mailing list
> > > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> > > >
> > >
> > > Incompetence: When you earnestly believe you can compensate for lack of
> skill by doubling your efforts, there's no end to what you can't do.
> > >
> > > _______________________________________________
> > > Antique-johndeere mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> > >
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
> 
> Incompetence: When you earnestly believe you can compensate for lack of
> skill by doubling your efforts, there's no end to what you can't do.
> 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 

Incompetence: When you earnestly believe you can compensate for lack of skill by doubling your efforts, there's no end to what you can't do.