[Farmall] W 9 mag

[George Willer]

Ivan,

Just so you know... that mag does not have a safety gap to protect the coil
if the impulse is snapped without a connected load.  Yes, as you are aware,
the kill switch has to be changed when converting from a dist. back to a
mag.

George

----- Original Message ----- 
From: "Ivan Cousins" <ivancou at usachoice.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Wednesday, September 01, 2004 9:31 PM
Subject: [Farmall] W 9 mag


> Is the mag off a w 9 the same as an A or  M , an   H 4 ? Any differences
at
> all ? I picked one up at Portland for a young almish guy and it fires when
> you hold it in your hand and turn it .  He put it on the tractor and
nothing
> .
>  So he ran down the road tonight and used a neighbors phone to call me .
I
> cant shake the feeling that after we hung up that he hooked up the wire
from
> the old distributor up to the kill switch .
>  Second question , it has a hydraulic pump between the mag and the engine
,
> does it change anything ? I mean like rotation of the mag  .
> I promised I'd be down saturday night to try and help  get it going .
> Thanks Ivan
>
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>