[AJD] 1931 Unstyled John Deere D Exaust Pipe and Seat

[Louis]

Kevin,

I can get D pistons from my supplier.  They are $850 for a pair, with
rings and piston pins.  They are available in std., .045", .090", .125",
& .250" oversize.

Thank You,
 
Louis Spiegelberg
 
Spiegelberg Restoration and Service, LTD.
440-965-7679
 
mailto:sales at srstractor.com
 
http://www.srstractor.com
 
 


-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf
Of Kropelin
Sent: Saturday, November 06, 2004 9:52 PM
To: antique-johndeere at lists.antique-tractor.com
Subject: [AJD] 1931 Unstyled John Deere D Exaust Pipe and Seat


Greg, 
Thanks for the info about the exaust pipe. All I have left is the elbow
. and am going to order a welded pipe from my steel supply house to
replace the missing section. Please let me know if by chance you run
across a seat spring as well as the bracket that holds it to the gear
housing. My next project for this "D" is to get the pistons unstuck, All
I am going to do is remove the block and press out the pistons in my
press I hope that the bore will clean up! But if it does not would you
or anyone happen to know if oversize pistons are avail? And what might
the cost for such a purchase may be? 
Thanks Kevin
_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere