[AT] Carburetor Float for Farmal F12

Tue Nov 2 10:20:36 PST 2004

I had the same problem.  Soldered it and it works fine.

Bob Holtzer

At 11:39 AM 11/2/2004 -0500, you wrote:
>I recently tried getting my F-12 out after sitting for a few months.  After
>much cranking and pulling only resulted in failed starts and severe 
>floating, I
>pulled apart the carburetor to find the float filled with fuel.  I found a
>crack in it, opened it up a bit to drain the fuel and am trying to epoxy 
>it with
>JB Weld.  Does anyone know of a source for a new or good used float?
>
>Bob Straub
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at