[AJD] 1931 Unstyled John Deere D Exaust Pipe and Seat

[Steve Treimer]

Not if Greg really needs to unload a set (smile!)!
Steve Treimer (missing but not exactly lost)

--- greg at theoldtractorcompany.com wrote:

> As I recall, new oversize D pistons are in the $750-$800 range a set
> so let's hope yours comes unstuck and is in good shape!
> Greg
> 
> Greg Stephen
> The Old Tractor Company
> Stephen Equipment Company
> Box 709
> 7460 E Hiway 86
> Franktown, CO 80116
> 303-663-5246
> 303-468-0377 FAX<<--A GREAT WAY TO REACH ME!
> 
> 
> ------------------------------------------------
> On Sat, 6 Nov 2004 21:52:14 -0500, "Kropelin"
> <kropelin at netonecom.net> wrote:
> 
> > Greg, 
> > Thanks for the info about the exaust pipe. All I have left is the
> elbow .
> > and am going to order a welded pipe from my steel supply house to
> replace the missing section. Please let me know if by chance you run
> across a seat spring as well as the bracket that holds it to the gear
> housing. My next project for this "D" is to get the pistons unstuck,
> All I am going to do is remove the block and press out the pistons in
> my press I hope that the bore will clean up! But if it does not would
> you or anyone happen to know if oversize pistons are avail? And what
> might the cost for such a purchase may be? 
> > Thanks Kevin
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> > 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 



		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com