[AJD] Antique Tractor Gas Tank sealer

[Phil Kelley]

Dean,

Maybe check another radiator shop - I got one done for less than $35.

PK
----- Original Message ----- 
From: "Dean VP" <deanvp at att.net>
To: <at at lists.antique-tractor.com>; "AT JD"
<antique-johndeere at lists.antique-tractor.com>
Sent: Tuesday, November 09, 2004 4:22 PM
Subject: [AJD] Antique Tractor Gas Tank sealer


> I have soldered up the holes in my 1953 JD 60 gas tank (20 Gallon) but to
> make sure I have truly fixed it all. I would like to put a sealer inside.
> The tank actually looks pretty good inside as the rust out occurred from
the
> outside in. But before I put a sealer inside I need to prepare the inside
> surface. At least get rid of the oily film and gas residue.
>
> I've talked to a few motorcycle shops that sell the "Kreme" product but it
> comes in packages for two gallon applications and to do a 20 gallon tank
is
> prohibitively expensive.
>
> I've also contacted a classic auto restoration repair and parts dealer who
> sells a product for sealing a 25 gallon tank for $20 a quart or a complete
> etching and sealing kit for $49.95.
>
> In the conversation with this supplier he also suggested that I could get
> the tank boiled out at a radiator shop. I contacted a radiator shop and
> their minimum for a gas tank was $130.00. "WOW"
>
> What suggestions might any of you have who have been down this road?
>
> Dean A. Van Peursem
> Snohomish, WA 98290
>
> I'm a walking storeroom of facts..... I've just lost the key to the
> storeroom door
>
>
> www.deerelegacy.com
>
> http://members.cox.net/classicweb/email.htm
>
>
>
>
>
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>