[AT] OT - JD STX38 fuel problems
Mike S Meulenberg
msm10301 at juno.com
Mon May 24 16:45:35 PDT 2004
Hi Dean,
The filter's about 1-1/4" in diameter, and is below the tank, which I
fill before I cut. I think I'll just cut with it, and not be concerned as
long as it runs. Or I'll take Walt's advice and buy a filter I can't see
through.
Regards,
Mike
On Mon, 24 May 2004 00:45:31 -0700 "Dean VP" <deanvp at att.net> writes:
> Mike:
>
> Let's think about this a minute. How big is the inside of the filter
> that
> you can see through the window? The fuel usage on a STX38 isn't all
> that
> high even while mowing. I'm just not sure the window is a good
> indicator of
> anything being incorrect. The required flow isn't that high. How
> long does
> it take to empty the tank while mowing? A long time. There may be
> enough gas
> flowing in the filter that you can't see it all through the window.
>
> Why it isn't full all the time is a question worth pursuing but all
> I can
> think of is there must be some back pressure but I don't know where
> it is
> coming from. Is it possible the filter is quite high in comparison
> to the
> level of the fuel in the tank? I think we need to know what the
> innards of
> the filter are in order to really decide that it not being full all
> the time
> is really a problem.
>
> As far as it now running w/o ever cutting out can be due to many
> things.
> Maybe there was a partial blockage somewhere in the system that is
> now
> cleaned out. Maybe it has something to do with going up or down
> hills or
> being on a side hill. Or what the level of the fuel is in the tank
> when you
> do that. I think what I would do is run the sucker until the problem
> returns. Right now I think we are chasing ghosts.
>
> Dean A. Van Peursem
> Snohomish, WA 98290
>
> What people can dream, people can do! George W. Bush
>
> www.deerelegacy.com
>
> http://members.cox.net/classicweb/email.htm
>
>
>
>
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list