[AT] (no subject)

[Frank]

Dean:
Let Dudley do it ....he is closer
but serious....not a big deal...
Frank
gremaux at tein.net
Central Montana
www.angelfire.com/mt/deeregp/index.html
----- Original Message -----
From: "Dean VP" <deanvp at att.net>
To: "'Antique tractor email discussion group'"
<at at lists.antique-tractor.com>
Sent: Tuesday, May 25, 2004 7:32 PM
Subject: RE: [AT] (no subject)


> Frank/Dudley:
>
> According to the B Parts Book PC330, there were three different axles used
> on the B depending on the configuration from Serial Number 60000 to the
end
> of the B production:
>
> AB1331
> AB4081
> AB4266 (Sub for AB1499R & AB3619R)
>
> I don't know what the splines count is on them however. I guess I could
> check my 1940 B but that has already been identified as a 12 splines. Its
> raining hard here and I don't want to get wet and check the splines count
on
> my 1947 and 1950 AN's. I can check later if that would help!
>
>
>
>
>
> Dean A. Van Peursem
> Snohomish, WA 98290
>
> What people can dream, people can do! George W. Bush
>
> www.deerelegacy.com
>
> http://members.cox.net/classicweb/email.htm
>
>
>
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Frank
> Sent: Tuesday, May 25, 2004 5:57 PM
> To: Antique tractor email discussion group
> Subject: Re: [AT] (no subject)
>
> in which case they changed 3 times
> USB had 10
> 39 up had 12 and you say yours is 15
>
> Frank
> gremaux at tein.net
> Central Montana
> www.angelfire.com/mt/deeregp/index.html
> ----- Original Message -----
> From: "Dudley Rupert" <drupert at premier1.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Tuesday, May 25, 2004 6:20 PM
> Subject: RE: [AT] (no subject)
>
>
> > I take it that the rear axle diameter/number of splines changed between
> the
> > early and late Model B's ...  I say this as my 52 B has 15 splines.
> > Dudley
> > Snohomish, Washington
> >
> > -----Original Message-----
> > From: at-bounces at lists.antique-tractor.com
> > [mailto:at-bounces at lists.antique-tractor.com]On Behalf Of Frank
> > Sent: Tuesday, May 25, 2004 1:57 PM
> > To: Antique tractor email discussion group
> > Subject: Re: [AT] (no subject)
> >
> >
> > yup..12 spline..take it to a program and put some light on it....you can
> > count them
> > I thought(first mistake if I am wrong) A and G were 10 spline....
> > Frank
> > gremaux at tein.net
> > Central Montana
> > www.angelfire.com/mt/deeregp/index.html
> > ----- Original Message -----
> > From: "Ron D Haskell" <rdhaskell at juno.com>
> > To: <at at lists.antique-tractor.com>
> > Sent: Tuesday, May 25, 2004 2:12 PM
> > Subject: Re: [AT] (no subject)
> >
> >
> > > Check the diameter of the axle, too big for a B.
> > >
> > > Ron Haskell
> > > rdhaskell at juno.com
> > > Riverside California USA
> > > http://www.oldengine.org/members/haskell/
> > >
> > > On Tue, 25 May 2004 11:47:41 -0600 "Frank" <gremaux at tein.net> writes:
> > > > tis a B
> > > > it is after serial number 96000(brakes are later )
> > > >
> > > _______________________________________________
> > > AT mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/at
> > >
> > >
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at