[AT] Allis Chalmers WD45 fender needed

[Jeff Pilbeam]

I can get ya one for about 200.00 plus shipping

Jeff's Jeep Barn
Britton Mi
Pilbeam's Centennial Farm 
Tecumseh Mi

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com]On Behalf Of Rob Wilson
Sent: Sunday, May 23, 2004 12:26 AM
To: Antique tractor email discussion group
Subject: [AT] Allis Chalmers WD45 fender needed


Hey guys I hope someone can help me out. We are trying to finish up the
WD45 we've been working forever on :( for my Son and today ran into
a major problem. Due to huge delays with a buddy of mine doing the 
sheet metal work we have been set way back on the completion date of
the WD45. When installing the right fender today we found that he (the
bodyman) cut and welded new metal in the fender making it look great but
also making it worthless in the longrun. It apprears that when he cut
it and replaced the rusty metal he failed to bolt it up to the fender 
bracket and the fender flattened out and now it will never fit. It has a 
very flat top instead of the normal WD series fender shape. So I'm hoping
someone out there has a good usable right fender so we can get this 
tractor done. Please reply to me off list if possible. 
Thanks,
Rob
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at