[AT] Rationale for firing orders

Mark Greer greerfam at raex.com
Wed Mar 24 19:49:00 PST 2004


A street legal 6 second Buick GNX clone? Is that on the bottle or just lots
of boost from the turbo? I'd like to go for a ride in that! About 12 years
ago when I was still racing a bit a buddy of mine had a bottle fed '62 Vette
with an iron headed 406 that would run easy mid 9 second quarters and make
the 45 mile drive to and from the track. That car ended up running sub 8
second quarters but it was a bit too radical at that point to do much street
driving. That is the quickest street ride I've been a passenger in and it
was an absolute blast to cruise in on the weekends. If you can put together
a "beater style GNX clone" that will run sub 7-second quarters and still be
street legal then I've been away from racin' WAY too long. Acceleration is
the ultimate rush. Pictures please!
Mark Greer

----- Original Message ----- 
From: "Steve W." <falcon at telenet.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, March 24, 2004 10:08 AM
Subject: Re: [AT] Rationale for firing orders


> 1/4 mile.
> Steve Williams
> Near Cooperstown NY
>
>
> ----- Original Message ----- 
> From: "Mark Greer" <greerfam at raex.com>
> To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> Sent: Wednesday, March 24, 2004 1:51 AM
> Subject: Re: [AT] Rationale for firing orders
>
>
> > You talkin' 1/8 mile or 1/4 mile?
> > Mark
> >
> > ----- Original Message ----- 
> > From: "Steve W." <falcon at telenet.net>
> > To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> > Sent: Wednesday, March 24, 2004 12:15 AM
> > Subject: Re: [AT] Rationale for firing orders
> >
> >
> > > I know a few members of that club.... The last Hi-Po 231 I put
> together
> > > got all the goodies, billet crank, rods, pistons, heads were angle
> > > shaved and the block was bored and decked, mains bored oversized and
> > > centers converted using splayed bolt caps, custom roller cam and
> > > rockers, the guy is bringing it back for me to final tune the turbo
> > > set-up. It is in a "beater style GNX clone". It does have a few
> > > non-stock items though!!!   I'll have to get a picture of it when
> were
> > > done. He's shooting for an under 7 street car, shouldn't be hard to
> get
> > > in the 6s with this beast.
> > >
> > >
> > > Steve
> > >
> > > ----- Original Message ----- 
> > > From: "Rob Wilson" <rowilson at infinet.com>
> > > To: "Antique tractor email discussion group"
> > > <at at lists.antique-tractor.com>
> > > Sent: Tuesday, March 23, 2004 11:28 PM
> > > Subject: Re: [AT] Rationale for firing orders
> > >
> > >
> > > > It's funny that those strange split journal cranks were so strong.
> > > That
> > > > is as long as you got one that has the hydraulic rolled fillets.
> They
> > > are
> > > > what was used in the Grand Nationals. I've seen stock cranks run
> well
> > > > into the 9s without a problem. Then again guys rebuilding their
> motors
> > > > in their Grand Nationals using standard cranks have joined the DOC
> > > > club in a street car. The DOC stands for drive over the crank. Not
> a
> > > > pretty site. Shoots them right out the bottom of the oil pan.
> > > >
> > > > Rob
> > > >
> > > >
> > > >
> > > > ----- Original Message ----- 
> > > > From: <BetCleve321 at aol.com>
> > > > To: <at at lists.antique-tractor.com>
> > > > Sent: Tuesday, March 23, 2004 5:32 PM
> > > > Subject: Re: [AT] Rationale for firing orders
> > > >
> > > >
> > > > > In a message dated 3/23/2004 4:51:11 PM Eastern Standard Time,
> > > > > falcon at telenet.net writes:
> > > > > Yep, But they finally got smart and beefed up the crank. The 225
> and
> > > odd
> > > > > fire 231s used common throw cranks, the early even fires were
> known
> > > for
> > > > > breaking cranks. But they didn't get much smoother till they
> used
> > > the
> > > > > countershaft.
> > > > >
> > > > > Steve
> > > > > The countershaft came later, in late 4.3 liter,262ci., V6
> engines.
> > > > > Interesting thread.
> > > > >
> > > > > Skip
> > > > > _______________________________________________
> > > > > AT mailing list
> > > > > http://www.antique-tractor.com/mailman/listinfo/at
> > > > >
> > > > _______________________________________________
> > > > AT mailing list
> > > > http://www.antique-tractor.com/mailman/listinfo/at
> > > >
> > >
> > > _______________________________________________
> > > AT mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/at
> > >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>




More information about the AT mailing list