[AT] Bad valve on an M

[Tim Bivens]

My Case VAC started doing this and it was just a valve
adjuster backed off. Took off the valve cover adjusted
that one valve, tightened down the lock nut and that
was it. You might not be so lucky but I would try
adjusting the valves befor you tear the head down.
After you get the valves adjusted properly you can run
a compression test.
Tim Bivens, Glen Rose, Tex.

--- "D. Day" <ddss at scppd.net> wrote:
> My Farmall Super MTA has developed a 'popping' sound
> that appears to be
> coming from the air intake stack.  It seems to have
> lost power and runs
> rough. A friend suggested that it might be a bad
> valve.  If that's what it
> turns out to be, am I looking at a major repair on
> this M gas burner?
> 
> Thanks
> 
> Dick
> 
> Dick Day Software Services
> 83712 552nd Avenue
> Norfolk, NE 68701
> 402/379-1606
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com