[AT] Super MTA oil pressure

[Edward Tabor]

You might have to prime the oil pump by taking off the fitting where the 
oil pressure gauge hooks to the motor and pumping in a half a quart or 
so.  You should get enough top end oil to make a decent mess while the 
engine runs.

ED

D. Day wrote:

>We just put the rebuilt head on the M and fired it up without the valve
>cover in place so we could make sure oil is circulating through the rocker
>assembly.  How much oil should we see?  The engine oil was totally drained
>about a week ago. Tonight we filled it up and put a new filter on prior to
>starting it.  We ran it a few minutes and didn't see a significant amount of
>oil.
>
>Should we see a gusher or a trickle?  Since the engine sat dry for so long,
>will it take a while before oil reaches the head?  Oil pressure hit about 70
>the second it was started and held there until we shut it off.
>
>Any advice would be greatly appreciated!
>
>Dick
>
>Dick Day Software Services
>83712 552nd Avenue
>Norfolk, NE 68701
>402/379-1606
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at
>
>
>  
>