[AT] Allis Chalmers Model G decals

[Mark Greer]

I wonder if he would have a set for my case 430 or does he just do the older
stuff?
Mark Greer

----- Original Message ----- 
From: "Lane Freeman" <lmfree at ptd.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, March 09, 2004 8:31 AM
Subject: Re: [AT] Allis Chalmers Model G decals


> Does Lyle only have decals for AC and Case.  Any chance he has anything
for
> IH?  I didn't see anything on his website.
>
> Lane Freeman
>
> ----- Original Message ----- 
> From: "Gilbert Schwartz" <gschwartz1 at mchsi.com>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Monday, March 08, 2004 11:33 PM
> Subject: Re: [AT] Allis Chalmers Model G decals
>
>
> > Charlie; Lyle takes some kind of pride in his decals and his vinyl
decals
> > are thin, really thin. It takes some very careful work to get the water
> out
> > from under them without stretching the vinyl. It takes some practice.
> > Usually Wacker's sets have something in them a person can use to do just
a
> > bit of trial on. I'm sure there are some others who make decent decals
but
> > we tend to stick with things we find that work. Seems easier that way.
> > Gil
> > ----- Original Message ----- 
> > From: "charlie hill" <chill8 at cox.net>
> > To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> > Sent: Monday, March 08, 2004 6:52 PM
> > Subject: Re: [AT] Allis Chalmers Model G decals
> >
> >
> > > Hi Gil,  I haven't seen any vinyl stuff from Lyle Wacker but what I
have
> > > seen in vinyl looks like it was made from electrical tape.  Apparently
> > > Lyle's stuff looks much better than what I'm used to seeing.
> > >
> > > Charlie
> > > ----- Original Message ----- 
> > > From: "Gilbert Schwartz" <gschwartz1 at mchsi.com>
> > > To: "Antique tractor email discussion group"
> > <at at lists.antique-tractor.com>
> > > Sent: Monday, March 08, 2004 7:31 PM
> > > Subject: Re: [AT] Allis Chalmers Model G decals
> > >
> > >
> > > > Cecil; We use only the vinyl, from Lyle Wacker. They aren't easy to
> > apply
> > > > but they look the best. We use just a small amount of water from a
> spray
> > > > bottle, apply the decal and CAREFULLY sponge the water out from
under
> > the
> > > > decal after it's in the correct position. Wackers address is
> > > > http://www.geocities.com/wackerdecals/   I've got his phone number
> > > somewhere
> > > > too if you want it.
> > > > Gil
> > > >
> > > > ----- Original Message ----- 
> > > > From: "Cecil E Monson" <cmonson at hvc.rr.com>
> > > > To: "Antique tractor email discussion group"
> > > <at at lists.antique-tractor.com>
> > > > Sent: Monday, March 08, 2004 10:14 AM
> > > > Subject: [AT] Allis Chalmers Model G decals
> > > >
> > > >
> > > > > I have a question as to which decals those of you with AC tractors
> > > > > would put on a Model G being newly painted. What raised the
question
> > is
> > > > > the fact that Maple Hunter offers decals two ways - vinyl cut or
> > mylar.
> > > > > Price is not a part of the question, BTW, although vinyl cuts are
> more
> > > > > expensive.
> > > > >
> > > > > I just ordered and received a set of vinyl cut decals for my 52
Cub
> > > > > and they look just fine. I have never seen the mylar decals so
have
> no
> > > > idea
> > > > > which is better or if that is the case.
> > > > >
> > > > > The way it looks to me is that the big difference is the mylar
> decals
> > > > > go on wet and can be moved after being put on if not exactly where
> > they
> > > > belong.
> > > > > I think the vinyl cut are there to stay and you have one shot at
> > getting
> > > > them
> > > > > in the right place.
> > > > >
> > > > > So, does anyone have an opinion as to which should go on the AC G?
> > > > > Any opinions from anyone who has used either kind would be
> > appreciated.
> > > > >
> > > > > Thanks in advance, Cecil
> > > > > -- 
> > > > > The nicest thing about telling the truth is you never have to
wonder
> > > > > what you said.
> > > > >
> > > > > Cecil E Monson
> > > > > Lucille Hand-Monson
> > > > > Mountainville, New York   Just a little east of the North Pole
> > > > >
> > > > > Allis Chalmers tractors and equipment
> > > > >
> > > > > Free advice
> > > > >
> > > > > _______________________________________________
> > > > > AT mailing list
> > > > > http://www.antique-tractor.com/mailman/listinfo/at
> > > >
> > > >
> > > > _______________________________________________
> > > > AT mailing list
> > > > http://www.antique-tractor.com/mailman/listinfo/at
> > > >
> > >
> > >
> > > _______________________________________________
> > > AT mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>