[AT] Question

Richard Fink Sr nancydick at keyconn.net
Sun Mar 7 05:21:47 PST 2004


Thanks Bob there is one in the local paper that is old style with a polite 
lite. I will check out the electric on this one if it is the board i will 
probably just change furnace.
R Fink
PA



At 08:28 AM 03/06/2004 -0800, you wrote:
>Richard, I've only worked on two of these electronic ignitors.  I could 
>determine whether or not the unit was being energized when turning up the 
>thermostat.  If the unit energized but still had no output, I just 
>replaced it.  To my recollection, there is nothing to repair on these 
>ignitors -- the usual printed circuit stuff most of us don't have much 
>experience with.  At least I could determine if there was power to the 
>ignitor and whether or not the thermostat worked.  Best wishes.  I recall 
>the replacement unit as being a universal type for around $100.
>
>Bob Holtzer
>
>At 02:31 PM 3/5/2004 -0500, you wrote:
>
>
>
>>>Who do we have on the list that knows propane furnaces. The furnace in 
>>>my tractor hauler [[Motor home]]won't work it is a DuoTherm model 
>>>65930-0624. It appears to have a electric igniter but does nothing when 
>>>turning up the thermostat. I know nothing about this type what voltage 
>>>should be at the ignitor plug to ignite it. Do i need power any where 
>>>else for it to come on .?????????????????? All and any help appreciated. 
>>>It has gas to the valve can loosen line and smell it.
>>>R Fink
>>>PA
>>
>>_______________________________________________
>>AT mailing list
>>http://www.antique-tractor.com/mailman/listinfo/at
>
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at




More information about the AT mailing list