[AT] Yesterday was a good tractor Day

[LeRoy Price III]

Guess I should pull it apart and give it a better look.  I have started the 
tractor 3 times
since and no problems.  It was sitting for 3 months.

Thought I'd get more repsonse.  Go figure..

LeRoy


>From: DAVIESW739 at aol.com
>Reply-To: Antique tractor email discussion group 
><at at lists.antique-tractor.com>
>To: at at lists.antique-tractor.com
>Subject: Re: [AT] Yesterday was a good tractor Day
>Date: Mon, 21 Jun 2004 13:52:24 EDT
>
>LeRoy, sometimes when a mag sits for a while the  contacts on the coil get
>corroded, its pretty simple to remove and then clean it  up. Use Silicon 
>grease
>to cover the contact points when reassembling you can get  the grease at 
>Radio
>shack or any electronics place. Be sure to clean all parts  that make 
>contact
>especially the metal parts of the coil these have to make a  good ground 
>for
>it to work. Some mags have brass contacts other are steel to  steel or
>aluminum, you just have take it apart and look to see what needs  cleaning. 
>  I have
>taken mags that had no output at all and cleaned them and  they worked 
>perfect.
>
>Walt Davies
>Cooper Hollow Farm
>Monmouth, OR  97361
>503 623-0460
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at

_________________________________________________________________
Watch the online reality show Mixed Messages with a friend and enter to win 
a trip to NY 
http://www.msnmessenger-download.click-url.com/go/onm00200497ave/direct/01/